AR 35S4G8A 微波功率放大器

AR 35S4G8A 微波功率放大器

35 W 连续波, 4 - 8 GHz (w/ DCP, IEEE, RS-232等程控接口)
品牌名
AR
产地
美国
配送
中国大陆
AR 所有产品

The Model 35S4G8A is a solid state, self-contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth and high gain are required. Housed in a stylish contemporary cabinet, the unit is designed for benchtop use, but can be removed from the cabinet for immediate equipment rack mounting. The 35S4G8A, when used with a sweep generator, will provide a minimum of 35 watts of RF power. Included is a front panel gain control which permits the operator to conveniently set the desired output level. The 35S4G8A is protected from RF input overdrive by an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0 dBm. The RF amplifier stages are protected from over temperature by removing the DC voltage to them if an over temperature condition occurs due to cooling blockage or fan failure. There is a digital display on the front panel to indicate the operate status and fault conditions when an overtemperature or power supply fault has occurred. The unit can be returned to operate when the condition has been cleared. The 35S4G8A includes digital control for both local and remote control of the amplifier. The control system is composed of a 16-bit RISC microcontroller board which handles primary functions of the amplifier and interprets commands sent to it from an 8-bit remote interface board. This 8-bit microprocessor controlled board provides both IEEE-488 (GPIB) and asynchronous, full duplex RS-232 control of all amplifier functions. The Model 35S4G8A is housed in a cabinet and designed to provide standalone performance for RF testing. It is also configured to be used as a sub-amplifier in a 60 watt, 90 watt, or 120 watt higher power amplifiers. It can be added to in an incremental fashion to become a part of these higher power units, yet still be used as a standalone 35-watt amplifier. The RF output connector must be configured to the rear panel to be used as a sub-amplifier.

嘉兆科技综合产品目录
嘉兆科技综合产品目录
相关产品
关于嘉兆
嘉兆简介
荣誉证书
加入团队
荣誉客户
联系我们
我们的品牌
客户服务
在线客服
客户留言
目录索取
设备维修
维修.校准.升级
专业培训
系统服务
设备保养
嘉兆动态
新闻中心
展会活动
基础知识库
其他服务
商城
软件无线电
激光测振仪
友情链接
关注我们
关注嘉兆科技公众号
版权信息
嘉兆科技(CORAD)所发布展示的“产品信息”,“解决方案”版权归嘉兆科技所有,嘉兆科技拥有其代理权。任何收集本站产品信息并未经嘉兆科技许可,嘉兆科技将保留追究侵权者法律责任的权利。
廉洁

粤ICP备06126740号-1 嘉兆网 © Corad Technology Ltd. 始创于1980年